# RaceSafe Provent 3.0 Body Protector Size Guide

## **RaceSafe Provent 3.0 Body Protector Size Guide**

**![](https://cdn.kiwisizing.com/racesafe-1685959269100.png)**

**The starting size, based on your chest measurement.**

• Over light clothing, place a tape measure close up under the arms & measure the fullest part of the chest.

• The correct size should be a snug fit within the adjustment available from the side, without being too tight or restrictive. 

**The correct front length option.**

• From your natural tipping point at the front (approx 1" below the ribs), up over the shoulder & down to the level point on the back.

• It may help to wear a belt, placed under your ribs, to get a level measure front to back.

• The correct fit should ensure the foam segments at the front are long enough to cover the bottom ribs whilst not being too long to restrict movement.

**The correct back option.**

• Take a back measurement from the vertebrae below the C7 (prominent one at the base of your neck) down to where the Body Protector should finish.

• Sat in the saddle, measure down to approx 3/4 finger width clearance above the seat for general use. Racing models are designed to sit lower on the back. 

• The correct fit should provide both lower back protection & a full range of movement without the saddle interfering.

---

> Source: [Pet n Pony](https://petnpony.co.uk/pages/racesafe-provent-3-0-body-protector-size-guide)